9.2.0 CTRTransfer


For support in English, ask for help at Nintendo Homebrew on Discord.
If you appreciate this guide, I accept Donations through PayPal or Bitcoin.


This is add-on section for installing a 9.2.0 CTRTransfer image to your device.

To use the magnet links on this page, you will need a torrent client like Deluge

Note that if you have any payload files other than GodMode9.firm in the /luma/payloads/ folder on your SD card, holding (Start) on boot will display a “chainloader menu” where you will have to use the D-Pad and the (A) button to select “GodMode9” for these instructions.

Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!

You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.

What you need

Instructions

Section I - Prep Work
  1. Power off your device
  2. Insert your SD card into your computer
  3. Create a folder named cias on the root of your SD card if it does not already exist
  4. Copy GodMode9.firm from the GodMode9 .zip to the /luma/payloads/ folder on your SD card
  5. Copy the gm9 folder from the GodMode9 .zip to the root of your SD card
  6. Copy ctrtransfer_ticket_copy.gm9 to the /gm9/scripts/ folder on your SD card
  7. Copy the 9.2.0 CTRTransfer image .bin from the CTRTransfer .zip to the /gm9/ folder on your SD card
  8. Copy FBI.3dsx to the /3ds/ folder on your SD card
  9. Reinsert your SD card into your device
Section II - CTRTransfer
  1. Launch GodMode9 by holding (Start) during boot
  2. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
  3. Navigate to [0:] SDCARD -> gm9
  4. Press (A) on the CTRTransfer .bin to select it
  5. Select “CTRNAND options…”
  6. Select “Transfer image to CTRNAND”
  7. If prompted, select “Transfer to SysNAND”
    • This prompt will only appear if you have an EmuNAND
  8. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
    • This process will take some time
  9. Once the transfer has completed, press (A) to continue
  10. Press (B) to decline relocking write permissions if prompted
  11. Press (B) twice to return to the main menu
  12. Press (Home) to bring up the action menu
  13. Select “More…”
  14. Select “Scripts…”
  15. Select “ctrtransfer_ticket_copy”
  16. When prompted, press (A) to proceed
  17. Press (A) to continue
  18. Press (A) to relock write permissions
  19. Press (Start) to reboot your device
  20. Update your device by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • Updates while using B9S + Luma (what you have) are safe
    • If this gives you an error, set your DNS settings to “auto”
Section III - Launching FBI
  1. Launch the Download Play application
  2. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu
  3. Select “Miscellaneous options”
  4. Select “Switch the hb. title to the current app.”
  5. Press (B) to continue
  6. Press (B) to return to the Rosalina main menu
  7. Press (B) to exit the Rosalina menu
  8. Press (Home), then close Download Play
  9. Launch the Download Play application
  10. Your device should load the Homebrew Launcher
Section IV - Reinstalling Tickets

If script found no user tickets told you to skip this section, then skip this section

  1. Launch FBI from the list of homebrew
  2. Navigate to SD -> cias
  3. Return to the SD directory with (B)
  4. Select “gm9”
  5. Select “out”
  6. Select “ctrtransfer_tickets”
  7. Do the following process for either the eshop folder, unknown folder, or both
    • Navigate to the folder
    • Select “<current directory>”
    • Select “Install and delete all tickets”
    • Wait. The system may appear to freeze, just give it time.
    • Press (A) to confirm
    • Press (B) to decline installing tickets from CDN.
  8. Press (Home) to exit FBI
Section V - Remove CTRTransfer image
  1. Launch GodMode9 by holding (Start) during boot
  2. Navigate to [0:] SDCARD -> gm9
  3. Press (X) on the CTRTransfer image .bin to delete it
  4. Press (A) to confirm
  5. Press (Start) to reboot your device

Continue to Finalizing Setup